DLP® (Digital Light Processing) is a proprietary technology from Texas Instruments™ that offers digital projection with higher contrast, faster response time, good pixel structure and virtually no color degradation.
The sleep timer turns off the projector after a set period of time.
Direct Power On
Turn on the projector directly from the power source. This feature aids installations that rely on power-on timers. The sleep timer can be used to turn the projector off after a set time.
Take control of the projector using HEX or ASCII commands via RS-232 cable.
Signal Power On
The projector powers on when it receives a signal through the HDMI input. This ensures the projector is turned on at the same time as the source device.
The wired remote connection allows all aspects of the projector to be individually controlled without requiring a line-of-sight to the projector; invaluable when using multiple units during live events.
Using the compatible RoomView® software you can power on/off, monitor, manage and control up to 250 projectors at the same time from any computer.
Four Corner Adjustment
Four corner geometric correction enables quick and easy image adjustments from any of the corner points of the image. This is ideal for uneven or angled projection surfaces.
Image stacking enables flexible installations for greater redundancy or double the image brightness without significantly increasing the installation cost. An image is displayable without interruption while swapping lamps or servicing one of the projectors or any brightness is achievable using geometry adjustment. Alternatively, images can be realigned to be perfectly square if the alignment is beyond the lens shift range.
Simplify installations by transmitting uncompressed video/audio and control commands using standard shielded CAT6 cabling up to 328 feet (100m).