ProScene WUXGA Installation Projector


  • Bright 6,500 ANSI lumens for large environments
  • 4 corner geometric correction for easy installation of stacking solutions or uneven walls
  • 1.8x zoom for excellent image from a short or long distance
  • 360-degree operation, vertical/horizontal keystone and lens shift for flexible applications
  • Full control over LAN and RS-232 using Crestron, IP Link, Extron PJ-Link and telnet
  • Integrated HDBaseT for long remote installations

Bright projection with installation and network control flexibility

The WUXGA Optoma ProScene WU615T is a bright 6,500 lumen projector for professional installations in large corporate environments and houses of worship. DLP technology ensures accurate colors, excellent contrast and vivid images for an outstanding visual experience.

Advanced installation adjustments, including four corner corrections, keystone, horizontal and vertical lens shift enable quick setup and easy usability from any angle and on uneven. The 1.8x zoom lens provides an adjustable 1.2-2.16:1 throw ratio to easily adjust the projected image for flexible installation.

Robust inputs include HDMI with MHL and HDBaseT for connectivity to a wide range of devices with long cable distances without loss of image fidelity. Eco+ lamp power management mode enhances energy efficiency.

DLP Technology®

DLP® (Digital Light Processing) is a proprietary technology from Texas Instruments™ that offers digital projection with higher contrast, faster response time, good pixel structure and virtually no color degradation.

Top Loading Lamp

The lamp can easily be replaced in position even if the projector is wall-mounted.

Sleep Timer

The sleep timer turns off the projector after a set period of time.

Direct Power On

Turn on the projector directly from the power source. This feature aids installations that rely on power-on timers. The sleep timer can be used to turn the projector off after a set time.

RS-232 Control

Take control of the projector using HEX or ASCII commands via RS-232 cable.

Signal Power On

The projector powers on when it receives a signal through the HDMI input. This ensures the projector is turned on at the same time as the source device.

Wired Remote

The wired remote connection allows all aspects of the projector to be individually controlled without requiring a line-of-sight to the projector; invaluable when using multiple units during live events.

Lan control

Using the compatible RoomView® software you can power on/off, monitor, manage and control up to 250 projectors at the same time from any computer.

Four Corner Adjustment

Four corner geometric correction enables quick and easy image adjustments from any of the corner points of the image. This is ideal for uneven or angled projection surfaces.

Image Stacking

Image stacking enables flexible installations for greater redundancy or double the image brightness without significantly increasing the installation cost. An image is displayable without interruption while swapping lamps or servicing one of the projectors or any brightness is achievable using geometry adjustment. Alternatively, images can be realigned to be perfectly square if the alignment is beyond the lens shift range.


Simplify installations by transmitting uncompressed video/audio and control commands using standard shielded CAT6 cabling up to 328 feet (100m).

Additional information

360 OperationYes
Aspect Ratio16:10
Brightness6,500 ANSI lumens
Compatible Aspect Ratio16:10 Native, 16:9 and 4:3 Compatible
Contrast Ratio10,000:1
Display TechnologySingle 0.65” WUXGA DLP® Technology by Texas Instruments
Displayable Colors1.07 billion
Image Size27.9”-301.8”
Keystone Correction±40% vertical & horizontal
Light Source Life2000
Light Source Type465W
Light Source Life3,000/2,000 (Eco/Bright)
Lens ShiftVertical: +20% ;Horizontal: ±10%
Maximum ResolutionWUXGA (1920×1200)
Native ResolutionWUXGA (1920 x 1200)
Noise Level37dB/39dB (Eco/Active)
Operating Temperature41–104°F
Portrait ModeYes
Power Consumption560W typical, 645W max (Bright), 445W typical, 510W max (Eco), <0.5W (Standby) @ 110V AC
Power SupplyAC input 100 – 240V, 50 – 60 Hz, auto-switching
Projection Distance4.3’ – 26.25’
Projection LensF=17.63-31.36mm, manual focus
Projection MethodFront, rear, ceiling count, tabletop
Projection Screen Size27.9" – 301.8"
Remote ControlFull size remote
Throw Ratio1.2-2.16:1
Zoom Type1.8x optical, 0.8 – 2.0x digital
3D SupportYes
Computer CompatibilityUXGA, SXGA+, HD, WXGA, XGA, SVGA
Horizontal Scan Rate15.375~91.146 KHz
Optional WirelessNo
Vertical Scan Rate24~ 85 Hz (120Hz for 3D feature)
Video CompatiblityPAL SECAM 576i/p, NTSC 480i/p, HD 720p/1080i/1080p
Dimensions (W x H x D)16.7” x 6.3” x 13.5”
SecurityKensington Lock, password protection
Weight14 lbs
Optional AccessoriesUniversal ceiling mount, DLP® Link™ 3D glasses, HDBaseT transmitter
Standard AccessoriesAC power cord, remote control, batteries, multilingual CDROM, user’s manual, quick start guide and warranty card
UPC796435 44 103 6
Warranty Info3-year Optoma Express Warranty, 1-year on lamp
  • WU615T-Datasheet

  • WU615T User Manual

  • WU615T_Front_with-flare_300dpi

  • WU615T_Front_300dpi

  • WU615T_Back_300dpi

  • WU615T_Right-Facing_300dpi

  • WU615T_Left-Facing_300dpi

  • WU615T_Top_300dpi


Low profile universal ceiling mount (white color) for most Optoma...

Low profile universal ceiling mount (black color) for most Optoma...


Advanced HDBaseT for 4K UHD and 1080p Video

Remote Mouse Control (hard wire port available)

Replacement lamp

Sorry, there are no reviews at this time.