WUXGA Short Throw Installation Projector


  • Bright 5,500 lumens projection for large installations
  • Four corner geometric correction for easy installation of basic stacking solutions or on uneven walls
  • Project a super-bright 100” image from 5’ 7” away
  • Vertical/horizontal keystone and lens shift for flexible installation
  • Full control over LAN and RS-232 using Crestron, IP Link, Extron PJ-Link and Telnet
  • Built-in HDBaseT ideal for long cable runs in the install environment

Bright projection with installation and network control flexibility

The 5,500 lumens WUXGA Optoma WU515TST short throw projector is engineered for the demanding needs of professional installations and corporate environments. DLP technology ensures accurate colors, excellent contrast and vivid images for an outstanding visual experience.

Advanced installation adjustments, including four corner corrections, keystone, horizontal and vertical lens shift enable quick setup and easy usability from any angle and on uneven. The 0.79:1 throw ratio enables large image projections in space-constrained environments.

Robust inputs include HDMI with MHL, DisplayPort and HDBaseT for connectivity to a wide range of devices with long cable distances without loss of image fidelity. Eco+ lamp power management mode enhances energy efficiency.

DLP Technology®

DLP® (Digital Light Processing) is a proprietary technology from Texas Instruments™ that offers digital projection with higher contrast, faster response time, good pixel structure and virtually no color degradation.

Top Loading Lamp

The lamp can easily be replaced in position even if the projector is wall-mounted.

Sleep Timer

The sleep timer turns off the projector after a set period of time.

Direct Power On

Turn on the projector directly from the power source. This feature aids installations that rely on power-on timers. The sleep timer can be used to turn the projector off after a set time.

RS-232 Control

Take control of the projector using HEX or ASCII commands via RS-232 cable.

Signal Power On

The projector powers on when it receives a signal through the HDMI input. This ensures the projector is turned on at the same time as the source device.

Wired Remote

The wired remote connection allows all aspects of the projector to be individually controlled without requiring a line-of-sight to the projector; invaluable when using multiple units during live events.

Lan control

Using the compatible RoomView® software you can power on/off, monitor, manage and control up to 250 projectors at the same time from any computer.

Four Corner Adjustment

Four corner geometric correction enables quick and easy image adjustments from any of the corner points of the image. This is ideal for uneven or angled projection surfaces.

Image Stacking

Image stacking enables flexible installations for greater redundancy or double the image brightness without significantly increasing the installation cost. An image is displayable without interruption while swapping lamps or servicing one of the projectors or any brightness is achievable using geometry adjustment. Alternatively, images can be realigned to be perfectly square if the alignment is beyond the lens shift range.


Simplify installations by transmitting uncompressed video/audio and control commands using standard shielded CAT6 cabling up to 328 feet (100m).

Additional information

Aspect Ratio16:10
Brightness5,500 ANSI lumens
Compatible Aspect Ratio16:10 Native, 16:9 and 4:3 Compatible
Contrast Ratio10,000:1
Display TechnologySingle 0.65” 1080p DLP® Technology by Texas Instruments
Displayable Colors1.07 billion
Image Size29.38” – 305.6”
Keystone Correction±40% vertical & horizontal
Light Source Life3000
Light Source Type365W
Light Source Life5,000/3,000 (ECO/Bright)
Lens ShiftVertical: +20%;Horizontal: ±10%
Maximum ResolutionWUXGA (1920×1200)
Native ResolutionWUXGA (1920 x 1200)
Noise Level32dB
Operating Temperature41–104°F
Power Consumption445W (Bright), 335W Max (ECO), <0.5W (Standby)
Power SupplyAC input 100 – 240V, 50 – 60 Hz, auto-switching
Projection Distance19.7” – 204.7”
Projection LensF=11.66mm, manual focus
Projection MethodFront, rear, ceiling count, tabletop
Projection Screen Size29.38” – 305.6”
Remote ControlFull size remote
Throw Ratio0.79:1
Zoom Type0.8 – 2.0x digital
Computer CompatibilityUXGA, SXGA+, HD, WXGA, XGA, SVGA, WUXGA
Horizontal Scan Rate15.375~91.146 KHz
Optional WirelessNo
Vertical Scan Rate24~ 85 Hz (120Hz for 3D feature)
Video CompatiblityPAL SECAM 576i/p, NTSC 480i/p, HD 720p/1080i/1080p
Dimensions (W x H x D)16.7” x 13.5” x 6.3”
SecurityKensington Lock, password protection
Weight14 lbs
Standard AccessoriesAC power cord, VGA cable, remote control, batteries, multilingual CDROM user manual, quick start guide and warranty card
UPC796435 44 145 6
Warranty Info3 Year parts and labor limited warranty on the projector, 1-year lamp warranty or 1000 hours (whichever comes first)
  • Optoma_WU515TST_Datasheet

  • WU515TST-User-Manual

  • WU515TST_Front_with-flare_300dpi

  • WU515TST_Front_300dpi

  • WU515TST_Right-Facing_300dpi

  • WU515TST_Left-Facing_300dpi

  • WU515TST_Off-Front_300dpi

365W Philips lamp for select Optoma projectors.

Low profile universal ceiling mount (white color) for most Optoma...

Description: Low profile universal ceiling mount with extension poles (white...


RF 3D Emitter (compatible with ZF2300GLASSES only).

RF 3D Glasses (compatible with BC300 emitter only).

Advanced HDBaseT for 4K UHD and 1080p Video

Sorry, there are no reviews at this time.